Lilux-help

lilux-help@lilux.lu

584 discussions

by Serge Marelli

Hi there, Using Ximian Evolution 1.4.4, when I write mails (using Ximian) it usually sends them right away as soon as I hit the "finish/send" button (I'm using IP-over-cable). I'd like to keep the messages in the "Outbox" for a few minutes before they're sent, so I have a chance to change my mind or review the messages. Does anyone know if this is possible? Serge -- ---------------------------------------------------------------------- Serge Marelli, Luxembourg E-mail : serge.marelli(a)linux.lu ---------------------------------------------------------------------- LiLux, Luxembourg LUG : http://www.linux.lu/ Defending Innovation against Patent Inflation http://swpat.ffii.org/

21 years, 11 months

WLAN range problems

by Christian Glodt

Hi everyone, currently I'm replacing my old 10Base2 ethernet at home with a 802.11g WLAN. I'm running into some range problems. The hardware is the following: Allnet 0271 PCI cards (supported by stock 2.6 kernel, yay) SMC 2802W.V2 PCI cards (supported by ndiswrapper only, shame) Linksys WRT54GS Router (nicely hackable) The trouble is that the PCI cards are unable to connect wirelessly, even though the distance is less than 10 meters. There are 2 walls inbetween the PCs. The house was built in 1974, and I'm not sure if any steel-reinforced concrete has been used. Some experiments have shown that as long as there is an approximate line of sight between any of the components, things will work somewhat, although the range is still bad ( > 50% packet loss at less than 10 meters distance). Curiously, a Centrino-based laptop (802.11b) gets "great" range (> 20 meters). I've tried forcing the whole WLAN to 802.11b, but that doesn't seem to help the PCI cards. I've tried changing channels, toggling encryption, etc, but nothing helped. Does anyone know if replacing the antennas on the PCI cards might help? Has anyone tried some? There are also active antennas (http://www.lirr.net/BA24.htm for example), which might work well, but they are a bit pricy (119 USD for this model). Or should I try to send the cards back and get a replacement? Any help is greatly appreciated, Christian Glodt

21 years, 11 months

Last call for restaurant-meeting on Thursday 26th 2004

by Pascal.Steichen＠linux.lu

Hi all, Our summer restaurant-meeting will take place on Thursday 26th 2004 at the 'Il Fragolino', if you want to join and haven't told us please do before tomorrow noon. We are 7 at the moment ! ciao, pst

21 years, 11 months

kmenuedit

by Alex

Hi Using SuSE 9.1, I have trouble using kmenuedit: I add an entry (item), save all, and then start via the k-menu. The entry appears correctly. Then I try to edit it again via kmenuedit: The entry has disappeared. I have always made an update via YOU of the kdelibs3, but that doesn't change anything. I googled around, but no real answer. So I ask here: Where are these menuentries stored, how can I fix this problem or how to go around? Thanx Al

21 years, 12 months

lb.wikipedia.org

by Bob Hentges

> > AH 'lb' is the language code and 'lu' te country code got also caught the fist tme ;) > > A big thanks to bob hentges, sorry for not having helped so much ;( but I'm glad we made it ;) > > ciao, > pst As much as I would have liked to have been the one registering the luxembourgish wikipedia, it wasn't me, but Caroline Ewen, who did, and is actually still doing most of the job. Please CC me for futher replies, as at the moment I am not subscribed to the list. Thanks Friendly, Bob Hentges -- http://bob.hentges.lu/

21 years, 12 months

Re: [Lilux-info] Invitation to our summer restaurant-meeting !

by Pascal Steichen

On Thu, Aug 19, 2004 at 02:51:30PM +0200, Francois-Rene Rideau wrote: > On Thu, Aug 19, 2004 at 01:51:14PM +0200, Pascal Steichen wrote: > > This summer's restaurant-meeting will take place at the "Il Fragolino" (italian food : http://www.il-fragolino.lu) > > > > Please confim your presence by mail : contact(a)linux.lu before monday 23/08/2004 ! > > It's quite nice to know the place. > Now if only you could also specify the date and time > it would be easier to synchronize. > Oh, and please keep the place specification in that same message > where you specify date and time, which will spare a lot of cross-referencing. > And of course, send that message to the same people who are concerned! > > Now you understand the difficulty of synchronization in a distributed system! > And we haven't started talking about two-phase commit and > other such algorithms. Very good remark ;) Totally forgot that, well it is on Thursday 26th August 2004 at 20h00 ! This info can also be found on http://www.linux.lu/ > > [ François-René ÐVB Rideau | Reflection&Cybernethics | http://fare.tunes.org ] > [ TUNES project for a Free Reflective Computing System | http://tunes.org ] > "I object to doing things that computers can do." > -- Olin Shivers -- Pascal Steichen pascal.steichen(a)linux.lu Lilux ASBL www.lilux.lu " Linux is like a woman, hard to understand But very nice once you get under the hood. "

21 years, 12 months

Invitation to our summer restaurant-meeting !

by Pascal Steichen

Hi all, This summer's restaurant-meeting will take place at the "Il Fragolino" (italian food : http://www.il-fragolino.lu) Please confim your presence by mail : contact(a)linux.lu before monday 23/08/2004 ! Your better half is also welcome ;) Regards, -- Pascal Steichen pascal.steichen(a)linux.lu Lilux ASBL www.lilux.lu " Linux is like a woman, hard to understand But very nice once you get under the hood. "

21 years, 12 months

external hard drive enclosure

by Eric Dondelinger

Hi, I'm looking into buying an external hard drive enclosure with USB2 & firewire ports, for fitting with an IDE or SATA 3.5" drive. I've been doing some research, but I've nowhere found information on the maximum capacity these things support - I imagine the IDE-to-USB-or-Firewire bridge would be subject to the same sort of limitations we've seen over the years with the PC BIOS. Can anyone point me to more info? TIA, Eric

21 years, 12 months

Problems with playing video files

by Jean-Jacques Mouris

Hello, I have trouble with output of video files (.mpg, playing DVDs, etc) in my new installation. Before installing the sound-card, I could watch mpgs in kaffeine or xine. After installing the sound card, I have permanent crashes of both applications. In KDE, they crash before playing anything, in IceWM, the kaffeine plays the sound, but not the video of mpg files. Error messages are the following: (on the console:) kaffeine: simple.c:1513: snd_mixer_selem_set_playback_volume: Assertion `elem->type == SND_MIXER_ELEM_SIMPLE' failed. ERROR: Communication problem with kaffeine, it probably crashed. (in the KDE Crash Handler:) (no debugging symbols found)...Using host libthread_db library "/lib/tls/libthread_db.so.1". (...) #4 0x412ebe8b in __waitpid_nocancel () from /lib/tls/libpthread.so.0 #5 0x40881f32 in KCrash::defaultCrashHandler () from /opt/kde3/lib/libkdecore.so.4 #6 <signal handler called> #7 0xffffe410 in ?? () #8 0xbfffdb4c in ?? () #9 0x00000006 in ?? () #10 0x00002a50 in ?? () #11 0x414527a1 in raise () from /lib/tls/libc.so.6 #12 0x41453f79 in abort () from /lib/tls/libc.so.6 #13 0x4144bfe3 in __assert_fail () from /lib/tls/libc.so.6 #14 0x418e4b15 in snd_mixer_selem_set_playback_volume () from /usr/lib/libasound.so.2 #15 0x42744443 in ao_alsa_set_property () from /usr/lib/xine/plugins/1.0.0/xineplug_ao_out_alsa.so #16 0x08343ef0 in ?? () #17 0x00000000 in ?? () #18 0x00000000 in ?? () #19 0xbfffdd10 in ?? () #20 0x4147b3fb in sscanf () from /lib/tls/libc.so.6 Does anybody have an idea how I can fix this problem ?? Thanks for your help JJ Mouris

21 years, 12 months

Rep:Re: [Lilux-help] programs works as root, but not as user

by Vincent Bremaud

If this doesn't work, the thing I would do would be to launch mozilla in gdb, wait for the SIGSEGV signal, and see in which line in the source of Mozilla is the problem. Maybe a variable contains a reference to the resource causing the problem. Just a thought... -----Message d'origine----- De: Patrick Kaell <sparc(a)kayoon.net> A: Patrick Useldinger <pu(a)vo.lu> Date: 08/08/04 Objet: Re: [Lilux-help] programs works as root, but not as user Patrick Useldinger wrote: > Hi all, > > my Mozilla runs fine when I am the root user, but not when I use a > "normal" user. It starts OK, gets the default page, and produces a > segmentation fault when it is about to render the page. > > As it is OK when run with root permissions, I suppose it is a permission > or path problem. > > My more general question is: how can I find out which ressources are > searched for, accessed, and with what result? This is very strange. I would log in as a normal user and do a mv .mozilla .mozilla.bck Start Mozilla and let it create a new .mozilla. Check if the problem still persists. A good method to see which files are accessed is by using strace. But I have never used strace on a big program like Mozilla. Have you changed your Mozilla or do you use the default Slackware package? Greetings, Patrick Kaell _______________________________________________ Lilux-help mailing list Lilux-help(a)lilux.lu http://lilux.lu/mailman/listinfo/lilux-help _____________________________________________________________________ Envie de discuter en "live" avec vos amis ? Télécharger MSN Messenger http://www.ifrance.com/_reloc/m la 1ère messagerie instantanée de France ___[ Pub ]____________________________________________________________ Inscrivez-vous gratuitement sur Tandaime, Le site de rencontres ! http://rencontre.rencontres.com/index.php?origine=4

22 years

← Newer
1
...
41
42
43
44
45
46
47
...
59
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

Lilux-help